background image

3

 

 

Attention Owners and Operators 

 

The equipment is designed to provide safe and productive processing, cooking and warming of food products 
as long as the equipment is used in accordance with the instructions in this manual and is properly maintained.   
Unless the operator is adequately trained and supervised there is a possibility of serious injury. Owners of this 
equipment bear the responsibility to make certain that this equipment is used properly and safely, and to 
strictly follow all of the instructions contained in this manual and the requirements of local, state or federal law. 

Owners should not permit anyone to touch this equipment unless they are over 18 years old, are adequately 
trained and supervised, and have read and understood this manual. Do not attempt to repair or convert any 
gas types on your own. Repairs and conversions are to be made solely by an authorized local servicer. 
Owners should also ensure that no customers, visitors or other unauthorized personnel come in contact with 
this equipment. Please remember that supplier cannot anticipate every circumstance or environment in which 
its equipment will be operated.    It is the responsibility of the owner and the operator to remain alert to any 
hazards posed by the function of this equipment. If you are ever uncertain about a particular task or the proper 
method of operating this equipment, ask your supervisor. 

This manual contains a number of precautions to follow to help promote safe use of this equipment.   
Throughout the manual you will see additional warnings to help alert you to potential hazards. 

Warnings affecting your personal safety indicated by:

 

 

Warnings affecting your possible damage to the equipment and property are indicated by:

 

 

If any warning labels or this manual are misplaced, damaged, or illegible, or if you require additional copies, 
please contact your nearest representative or vender directly for these items at no charge. 

Please remember that this manual or the warning labels do not replace the need to be alert, 
to properly train and supervise operators, and to use sense when using this equipment. 

 
Please remember that this manual or the warning labels do not replace the need to be alert, 
to properly train and supervise operators, and to use sense when using this equipment. 

 
 
 
 
 
 

Model

 

GAS 

Number Of Burners 

 

BTU/hr Input Rating 

 

12”-2 burners

 

Natural 

50,000 

24”-4 burners

 

Natural 

100,000 

36”-6 burners

 

Natural 

150,000 

Summary of Contents for BFHP-12-2













Reviews: