Blue Diamond POWER RAKE Operation And Maintenance Manual Download Page 2

MANUFACTURER'S LIMITED WARRANTY

BLUE  DIAMOND  ATTACHMENTS,  a  manufacturer  of  quality  attachments,  warrants  new  BLUE
DIAMOND  ATTACHMENTS  products  and/or  attachments  at  the  time  of  delivery  to  the  original
purchaser, to be free from defects in material and workmanship when properly set up and operated
in accordance with the recommendations set forth by BLUE DIAMOND ATTACHMENTS, LLC.

BLUE  DIAMOND  ATTACHMENTS  liability  for  any  defect  with  respect  to  accepted  goods  shall  be
limited to repairing the goods at a BLUE DIAMOND ATTACHMENTS designated location or at an
authorized dealer location, or replacing them, as BLUE DIAMOND ATTACHMENTS shall elect. The
above shall be in accordance with BLUE DIAMOND ATTACHMENTS warranty adjustment policies.
BLUE DIAMOND ATTACHMENTS obligation shall terminate twelve (12) months for the Power Rake
after the delivery of the goods to original purchaser.

This warranty shall not apply to any machine or attachment which shall have been repaired or altered
outside  the  BLUE  DIAMOND  ATTACHMENTS  factory  or  authorized  BLUE  DIAMOND
ATTACHMENTS dealership or in any way so as in BLUE DIAMOND ATTACHMENTS judgment, to
affect its stability or reliability, nor which has been subject to misuse, negligence or accident beyond
the Company recommended machine rated capacity.

WARRANTY CLAIM

To submit a warranty claim, a return authorization from BLUE DIAMOND ATTACHMENTS must be
obtained. The failed part may then be returned. Tampering with the failed part may void the warranty.
This  warranty  does  not  include  freight  or  delivery  charges  incurred  when  returning  machinery  for
servicing.  Dealer  mileage,  service  calls,  and  pickup/delivery  charges  are  the  customers'
responsibility.

EXCLUSIONS OF WARRANTY

Except  as  otherwise  expressly  stated  herein,  BLUE  DIAMOND  ATTACHMENTS  makes  no
representation  or  warranty  of  any  kind,  expressed  or  implied,  AND  MAKES  NO  WARRANTY  OF
MERCHANTABILITY IN RESPECT TO ITS MACHINERY AND/OR ATTACHMENTS ARE FIT FOR
ANY PARTICULAR PURPOSE. BLUE DIAMOND ATTACHMENTS shall not be liable for incidental
or  consequential  damages  for  any  breach  or  warranty,  including  but  not  limited  to  inconvenience,
rental of replacement equipment, loss of profits or other commercial loss. Upon purchase, the buyer
assumes all liability for all personal injury and property resulting from the handling, possession, or
use of the goods by the buyer.

No  agent,  employee,  or  representative  of  BLUE  DIAMOND  ATTACHMENTS  has  any  authority  to
bind BLUE DIAMOND ATTACHMENTS to any affirmation, representation, or warranty concerning its
machinery and/or attachments except as specifically set forth herein.

This warranty policy supersedes any previous documents.

NOTE:

 Blue Diamond Attachments is a trademark of BLUE DIAMOND ATTACHMENTS

Summary of Contents for POWER RAKE





















































Reviews: