Blue Diamond Multi-Purpose Cutter, Operation And Parts Manual, Page: 31 / 41

3
1 Brush Cutters
888-376-7027
Blue Diamond Attachments, LLC
September 2020
7 .6 Service Record
The period recommended is based on normal operating conditions. Severe or unusual conditions
may require more frequent lubrication or oil changes.
Copy this page to continue record.
Hours and
Serviced By
Maintenance
Every 8 Hours
Make sure blade bolts are tightened to proper torque.
Make sure all retainer clips and cotter pins are in place.
Inspect the cutting blades for wear and damage.
Grease all lubrication points.
Every 50 Hours
Check blade carrier nut torque.
Annually
Make sure all fasteners are properly tightened.
Check deck, motor, and hoses for damage.
Inspect the cutting blades for wear and damage.
Wash the
cutter
.
7 .7 Welding Repairs
Before performing any type of welding repair to the
cutter
, contact Trailblazer for approval. Repair
welding must be done with care and with procedures that may be beyond the capabilities of the ordinary
welder.
WARNING
Projectile Hazard
Do not attempt to weld on the blades. They are hardened and will crack or otherwise be damaged,
causing failure and possible serious injury or death from thrown blades.
Personal Injury Hazard
Repairs or modifications to the
cutter
can result in serious injury or death should these repairs fail.
NOTICE
Anyone performing a welding repair should be certified in accordance with the American Welding Society (AWS)
standards.