Blue Diamond Multi-Purpose Cutter, Operation And Parts Manual, Page: 3 / 41

3
Brush Cutters
888-376-7027
Blue Diamond Attachments, LLC
September 2020
Pre-Delivery Checklist
The Dealer should inform the Purchaser of this product of the Warranty terms, provisions, and procedures that
are applicable. The Dealer and Purchaser should review the contents of the Operator’s Manual including safety
equipment, safe operation and maintenance, review the Safety Signs on the implement (and tractor if necessary),
and the Purchaser’s responsibility to train their operators in safe operation procedures.
• IMPLEMENTS: I have explained that a Safety Shield should be installed and maintained in good repair. If the
shield is not installed the purchaser accepts responsibility for any personal injury due to not having the shield.
• HYDRAULICS: I have made certain that the hydraulic supply pump, hoses, and motor is in good repair and
fastened securely in place to prevent injuries.
• MOUNTED IMPLEMENTS: I have explained that it is not possible to guard against thrown objects when
the cutter is lifted off the ground or operated in a vertical configuration, and that operator is responsible for
watching out for persons in the work area.
PRE-DELIVERY SERVICE
CHECK AND ADJUST OR LUBRICATE AS REQUIRED
Refer to this Manual for Details
Inspection Performed - Warranty and Safety Procedures Explained - Installation Complete
CUTTER

Make Sure The Pump Motor And Adapter Bolts Are
Properly Tightened

Make Sure The Blade Carrier Bolt Is Properly
Tightened And Cotter Pin Is In Place

Make Sure The Two Blade Bolts Are Tight

Make Sure The Blades Are Installed In Correct
Rotational Direction

Review Procedure To Configure The Cutter In One
Of The Three Possible Configurations

Make Sure All Hardware Is Properly Tightened

Retighten the tapered roller bearing in the pivot
arm after 15 minutes of initial use and again at 30
minutes. Recheck again before the next use.
I have thoroughly instructed the buyer on the above-described equipment. This review included the Operation and
Parts Manual content, equipment care, adjustments, safe operation, and applicable warranty policy.
Date__________________ Dealer Rep. Signature_________________________________________
The above equipment and Operator’s Manual have been received by me (the purchaser), and I have been
thoroughly instructed as to care, adjustments, safe operation, and applicable warranty policy. As the purchaser
I have read, understand, and take responsibility for the use of this attachment. I understand and
accept responsibility for the proper use of this cutter. I acknowledge this cutter is dangerous if not
used correctly or if the safety information is not followed.
Date__________________ Owner’s Signature_________________________________________
LUBRICATION & HYDRAULICS

Make Sure All Grease Joints Are Lubricated.

Check All Hoses And Coupling For Damage Or
Leaks.
CUTTER
TO TRACTOR CONNECTIONS

Make Sure The Proper Hydraulic Connections Are
Available On the Tractor
SAFETY ITEMS

Make Sure Safety Shield Is Properly Installed

Make Sure Safety Decals Are Installed

Review This Operator’s Manual
Cut Here to Remove Page or Make Copies of
This Page