background image

- 11 -

R

EPLACEMENT

 P

ARTS

The warranty is stated in this book on page 14.  Failure to
return the Warranty Registration Card renders the warranty
null and void.

Blue Diamond has established a network of reputable
distributors/dealers with trained mechanics and full facilities
for maintenance and rebuilding, and to carry an adequate
parts stock in all areas of the country.  Their sales engineers
are available for professional consultation.  If you cannot
locate an Blue Diamond distributor in your area, contact
Blue Diamond or one of our Sales Branches listed below.

When ordering replacement parts, be sure to have the
following information available:

• Model and Serial Number of machine when ordering

Blue Diamond parts

• Model and Serial Number of engine when ordering

engine parts

• Part Number, Description, and Quantity

• Company Name, Address, Zip Code, and Purchase

Order Number

• Preferred method of shipping

REMEMBER - You own the best!  If repairs are needed,

use only Blue Diamond parts purchased from
authorized Blue Diamond distributors.

The unit’s serial number can be found in the following
locations:

• The model and serial number are on the top front of the

roller frame

• The serial number is also stamped on the frame side

Write Model Number here

Write Serial Number here

DECAL

STAMP

Summary of Contents for 124010






















Reviews: