Blue Coat SG510 Series, Installation Manual

Page: 9 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 9
You can mount a SG510 in a standard mounting rack. See “Mounting the SG510 in
an Equipment Rack” on page 10 for rack mounting instructions.
SG510 Back Panel Features
The figure below shows the back of a SG510.
Figure 1-2: The Back of a SG510
The following features are located on the back of the SG510:
• An AC power connector.
• Two USB (Universal Serial Bus) ports.
• A serial port to connect to a PC, to a serial terminal, or to a stand-alone serial
console terminal.
• Two full-duplex, auto-sensing Ethernet network adapter ports supporting
10/100/1000 Base-T connections.
• An expansion slot for optional network, bridging, or SSL cards. See Chapter 4:
’Option Cards" for more information about SG510 option cards.
AC Power
Connector
Ethernet
Adapter
Ports
Serial
Port
USB
Ports
Expansion Slot for
SSL or Bridge Card