BLUCHER CP 700E, Instruction Manual, Page: 10 / 24

E
nglish
10 BLUCP700E
10. Start-up of the equipment
11. Information for the use of the power pack and battery charger
The battery charger is designed for 230 V CA 50-60 Hz. The new batteries are provided
partially charged and must be charged before using the machine for the first time. In
order to recharge the battery, the charger plug must be inserted into a wall socket and
the power pack must be placed in the battery charger. A 3.0 Ah power pack can be
recharged in approximately 60 minutes. The status of the charge for the power pack is
indicated by the luminous diode on the battery charger.
Remove the protection caps from remote control and hydraulic connection from the
BLUCP700E Compact pump. Next, connect the pressure tube and remote control unit as
shown in the illustration.
Insert the battery on the rear of the unit (see illustration)
and push until the safety switch clicks.
Attach the shoulder strap as shown in the illustration.
A
Caution: The eyelet of the shoulder strap can only be
hooked or unhooked in the position illustrated.