BLUCAVE.COM
5
Figure 2: Stick grip
3. Adjusting the handle position
Your Flashcell Screwdriver has two
operating positions. The handle and
body can be aligned in a pistol grip
orientation (Figure 1) or a stick grip
orientation (Figure 2).
To change between the two
configurations press the Rotate
Button (4) and rotate the front and rear
sections relative to each other.
Note
the unit will only rotate one direction.
Once you have begun rotation release
the button and continue to rotate until
the handle locks. You will hear a click
when it locks.
4. Connecting the Flashlight
Your Flashlight will connect to the rear
of your Flashcell Screwdriver.
Align and slide it onto the rear of the
Screwdriver as shown in Figure 3.
Note: The Flashlight will only fit one
way. Do not force it.
The switch on the Flashlight cycles
through 3 modes of operation. Main
Flashlight, Work area illumination
(Pistol Grip mode) and Off.
Figure 1: Pistol grip
maintenance
Like any tool or appliance, regular
maintenance will increase the life of
the product and provide maximum
working efficiency. Some important
maintenance tasks are listed below.
Keep the Screwdriver and Charger
clean and dust free.
Keep the ventilation slots free of any
dirt, dust or particles of any sort.
Regularly clean the housing with a
soft cloth to ensure the tool does not
become slippery or excessively dirty.
Lubrication - Your Screwdriver’s
gearbox has a high quality lubricant
applied during assembly which is
designed to last the life of the gearbox.
You are not required to lubricate the
gearbox.
Figure 3: Connect the Flashlight
Figure 4: Accessory holder detaches
from Charger for convenient use
