BLUCAVE.COM
11
New tools are shipped in a low charge
condition and must be fully charged
before use. It takes approximately 60
seconds to fully charge the tool.
Charging the tool should not be
undertaken casually. Through the
charging cycle monitor the tool and
make sure that Screwdriver is charging.
This can be done by reviewing the
Power Level Indicator (2).
Note: You may use the Screwdriver at
any time. The charging process does
the time frame as specified in this
manual, turn Charger off.
To reduce the risk of an electric shock,
unplug the Charger from the power
supply before attempting to clean it.
To clean tool or Charger, wipe with a
damp cloth. Use of any other cleaners
is not recommended.
Do not place any object on to, or allow
anything to rest on the Charger.
Make sure that the Charger cable is
positioned where it will not be stepped
on, tripped over or otherwise subjected
to damage or stress. Keep the lead
away from operating machinery.
Do not pull on the lead of the Charger
to disconnect it from the mains power
socket.
Do not use an extension cord unless
it is absolutely necessary. The use
of an improper extension cord could
cause the risk of fire, electric shock or
electrocution.
Never attempt to connect two Chargers
together.
Do not charge or use the tool in
locations where the temperature may
be below -25°C or exceed 40°C such as
alongside sheds or metal structures.
The Screwdriver can be charged or
operated at temperatures between
-25°C and 40° C.
when to charge the tool
not have to be completed to use the
tool and short charges will not harm
the tool.
