7
8
6
WARNING - To reduce the risk of injury during
operation, always read the instructions.
Always wear hearing protection. The effects of
noise can cause hearing loss.
Always wear a dust mask. When working with
wood and other materials, harmful dust may be
generated. Working with asbestos containing
materials is not permitted!
Always wear safety glasses. When working with
electric power tools, sparks, splinters, chips and
dust particles may be generated and these can
cause loss of sight.
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources.
To return your used device, please use the return
and collection systems or contact the retailer
where the product was purchased. They can take
this product for environmental safe recycling.
SAFETY
WARNINGS
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Warning!
When using mains-powered equipment, basic
safety precautions, including the following, should
always be followed to reduce risk of fire, electric shock,
personal injury and material damage.
Read the whole manual carefully and make sure you
know how to switch the Work light in an emergency.
Save these instruction and other documents supplied
with these reels for future reference.
TECHNICAL DATA
Work Light
MODEL: BWL-28-1
Rated Power Input
28W
Cord length
0.5m
Voltage
220V-240V~ 50Hz
Weight
1.2 Kg
BluCave tools are for private use only and are not suitable
for Commercial/Professional/Continuous Use.
The values given are valid for nominal voltages of 230V.
For lower voltage and models for specific countries these
values can vary.
SPECIAL SAFETY INSTRUCTIONS
a. Never fit a more powerful fluorescent tube in the Work
light than it is intended for.
b. Disconnect the Work light from the mains and allow
it to cool down completely before taking it apart to
replace the fluorescent tube or the starter.
c. Check the Work light is correctly assembled before
reconnecting to the mains.
d. Do not shine directly into eyes.
e. To reduce the risk of electric shock, unplug the unit
and allow to cool before attempting any cleaning.
f. Do not touch the tube with bare hands.
g. Do not handle with wet hands or operate when
standing on wet surface
h. Do not touch the housing or glass while hot.
EC-Declaration of conformity
We, the Batavia GmbH, Blankenstein 180, NL-7943PE
Meppel, declare by our own responsibility that the
product Work Light, Item-No 7060530, Model Nr. BWL-
28-1 is according to the basic requirements,which are
defined in the European Directives Electromagnetic
Compatibility 2004/108/EC (EMC).
For the evaluation of conformity, the following
harmonized standards were consulted:
EN 60598-2-4:1997, EN 60598-1:2008+ A11:2009
EN 62493:2010, EN 55015/A2:2009
EN 61547:2009, EN 61000-3-2/A2:2009
EN 61000-3-3:2008, 2006/95/EC; 2004/108/EC
Meppel, 01 september 2011
Meino Seinen, QA Representative
Batavia GmbH, Blankenstein 180,
7943 PE Meppel, Netherlands
Symbols
The following symbols are important for reading and
understanding the operating instructions. Please take
note of the symbols and their meaning. The correct
interpretation of the symbols will help you to use the
machine in a better and safer manner.
Distributed by:
Batavia GmbH
Blankenstein 180
7943 PE Meppel - Netherlands
Office phone: +31 (0) 522 820200
www.batavia.eu
4
5
8
7
6
9
10
BLUCAVE.COM
© Demain International P/L 10/2011
BWL-28-1-EN REV 05
Worklight BWL-28-1 REV 05.indd 2
22/06/2004 2:12:16 AM
