5/22/2018
BluSnap User Guide | BluArmor Helmets
https://bluarmorhelmets.com/pages/blusnap_userguide
3/13
(the side of the power button) to reveal the microUSB port/connector and the LED indicators. In a
manner similar to charging a battery bank or a mobile phone, connect a power source to BluSnap
through this microUSB port. The LEDs will glow to indicate the amount of charge available. BluSnap
uses a 2500mAh battery, and the charging time to go from empty to full charge could be 5-6 hours
(similar to basic power banks). All 4 LEDs will glow once BluSnap is fully charged, and you can
expect ~ 10 hours of riding on a full charge.
You will not be able to power BluSnap while it is charging. If you are going on a long ride, make sure
that BluSnap is fully charged and ready to go!
Turning your BluSnap ON/OFF
BluSnap's ON/OFF switch is visible on the top cover. Push it to turn ON; push it again to turn OFF. As
easy as that!
Filling Water
BluSnap is a miniaturized air cooler. It works by owing air through a moistened lter; the
evaporation of water from this moistened lter causes the temperature of the air to decrease giving
