background image

1 866 907 0122     blubathworks.com

2013-07

®

 1

Attention — Before Installation

Your choice is a testimonial to your excellent taste. Thank you for choosing from among Blu’s quality line of products. We 
recommend that you carefully read this installation guide to ensure your basin’s proper operation and reliability for many 
years to come.

- We recommend that the installation be done by a minimum of 2 people as a security precaution. Also make sure  
  to adopt the proper posture when lifting the basin.
- Adhere to all local building and plumbing codes. The diagrams in this guide are not construction plans. They are  
  visual aids. 

Installation Requirements

Please read the instructions carefully so as to avoid any damage to the fixture.

1. To ensure this product is installed properly, you must read and follow these guidelines.
2. The owner/user of the product must keep this information for future reference.
3. Consult local building codes to make sure the installation complies with standards.
4.  Remove the unit from its packaging. Before disposing of it, inspect the unit to make sure its in good shape. Should 

inspection reveal any damage or defect in the finish, contact your distributor. The warranty does not cover damages 
or defects in the finish once it has been installed. Blu Bathworks’ responsibility for shipping damages ceases upon 
delivery of the product in good order to the carrier. All complaints regarding damage due to transport must be made 
directly to the carrier.

5. Place the unit in the bathroom before you start working. Conserve all nuts and bolts.
6.  To protect the unit during installation, we recommend that you lay a piece of cardboard on the bottom.
7.  If the unit is covered with polyethylene protective film, do not remove until installation is complete to grant maximum 

protection. However, remove film where any two surfaces will be in permanent contact.

8.   Verify that all dimensions on the plan are the same as the ones of the unit.

Technical Support Assistance

 

If further assistance is required, please contact:

Product Support at 1.866.907.0122 (09:00 – 17:00hrs PST) or email [email protected]

North America

Blu Bathworks Inc.
188 Smithe Street,Vancouver, BC, Canada, V6B 6A9
T +1.604.299.0122  F +1.604.299.0125

Summary of Contents for SA3006






Reviews: