2017-12
1 866 907 0122 blubathworks.com
8
1
2
3
Fixing the Hinge Anchor
Fitting the Seat
Quick-Release Mechanism
•
Place the Top Fix Inserts into the fixing holes in the
toilet pan. Insert the screws within the Hinge Anchors
as shown and begin to tighten the screws until they
are loosely secured to allow for adjustment of the seat
on the pan.
•
Align and insert the pins into the seat hinge sockets
and firmly press down until you hear them ‘click’ into
position. Adjust the hinge anchors to make sure the
seat lines up with the edges of the toilet pan.
•
When you are satisfied the seat is in the correct
position, remove the seat from the hinge anchors (see
step 3) and fully tighten the screw in the Top Fix lnsert
(shown in step 1). Place the Cover Plates over the
Hinge Anchors.
•
Replace the seat and click into position.
•
This toilet seat is designed for quick and easy removal
when cleaning the toilet pan. To activate the quick
release lift the lid, seat up and press the button in the
centre of the hinges and lift.
•
To replace the seat, align the sockets with the pin and
firmly press into position.
•
Seat is designed to activate the quick release with NO
BUTTON. To release, lift lid and seat up, then pull up.
