Step 4.3
Connect the power cord to the
LED Light (C) as shown, and
make sure it is behind the panel
bracket, as shown in the pictures
to the right.
Step 4.4
You are provided with Wire Clips (D) to neatly run the LED Light (C) power cord down and behind
the water feature as shown in Fig 4.4A and Fig 4.4B.
Fig 4.4A
Fig 4.4B
Fig 5.1 A – 5.1 C
Step 5.1
Locate your level tool and draw a line on the wall indicating the top of the waterfall. Measure down
from the line down approximately 8 ¾” and draw another line to indicate the center of the Wall
Bracket (H). Using a level, hold the Wall Bracket (H) to the wall with the top angled towards you.
Mark both mounting holes on the wall. Remember to double-check your measurements. See
illustrations below.
Section
5
–
Mounting
the
Water
Feature
Fig 4.3 A & B
