Glued together as above.
All the pieces of the rocket section.
Place the axle through the holes in the sides, then
attach the sides to the rear plate as shown above.
Glue the rest of the pieces into place.
The washers
…
Place three on each end of the axle.
Each front sail is formed from the pieces shown
above.
Glue the main sections back to back, then attach
the support brackets.
Glue the two outer
“
clips
”
into position.
The two completed front sails.
Summary of Contents for Onaga Rocket Kohaya
Page 6: ...The completed model...
