10mm 3x2 Shops Roof
B10-MW-204
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and remember
to cut away from yourself at all times.
During the construction of this model, you may find it convenient to use pegs / elastic bands to hold pieces in place while
you allow glue to dry.
Roof Section (B10-MW-204)
Remove the four walls, roof and supports from
the sprue.
Glue the balconies into position below the
windows.
Apply glue to the edges of the roof and attach the
walls to it using the lugs provided (etched detail
outwards).
Glue the balconies into position below the
windows on the long sides…
..then on the short sides.