Glue the porch into place.
Starting with the door section, glue the wall covering
into place, aligning it with the etched pattern.
Work your way round the building adding each wall
cover in turn.
The completed foyer section.
Page 1: ...eces in place while you allow glue to dry Remove two of the supports and one wall section from the sprue as shown Note each section has a notch in it This will be at the top of the wall Turn the wall...
Page 2: ...porch into place Starting with the door section glue the wall covering into place aligning it with the etched pattern Work your way round the building adding each wall cover in turn The completed foye...
Page 3: ...ind it convenient to use pegs elastic bands to hold pieces in place while you allow glue to dry There are two different types of wall supplied with this kit they should alternate around the building G...
Page 4: ...onvenient to use pegs elastic bands to hold pieces in place while you allow glue to dry Remove one of the solid wall sections from the sprue and a support Glue the support to the back of the wall sect...
