ADDENDUM
Extract from SERVICE BULLETIN 600.023
SUBJECT:
Brewer Spray Disk and Gasket Application
A. An revised spray disk (p/n 82727) and associated
hat-shaped gasket (p/n 82215) comprise the
latest in a series of ongoing improvements for:
E-Max™
Coffee Brewers
E-Max
T™
Tea Brewers.
The hat-shaped gasket
must
be used with the new spray disk
on
E-Max™ and E-Max T™
B. and C.
(Omitted - refer to other equipment applications)
D.
All current production Bloomfield Brewers incorporate the
embossed spray disk
.
E.
The revised embossed spray disk has a different outflow rate
than either the flat spray disk or old-style embossed spray
disk. When replacing a flat spray disk or old-style embossed
spray disk with an revised embossed spray disk, the back-
pressure of the spray head will be changed.
Note the altered flow rates for E-Max™ when the new spray
head is installed:
Before
– Embossed spray disk and flat band gasket
Now
– Revised embossed spray disk and hat-shaped gasket
BEFORE
NOW
Gallons Time
Flow Rate
Time Flow Rate
½ Gal. 190 sec. .33 oz/sec 156 sec .41 oz/sec
F.
Cleaning of tubing, elbows, strainers and spray disks have
the potential to alter basic calibration settings of the brewer.
Whenever the brewer has been disassembled, or when parts
are changed, cleaned or adjusted, be sure to check all timed
functions and reset as required for an optimal brew.
26
82215
1-1/2“ (4 cm) HOLE
HAT-SHAPED GASKET
82727
EMBOSSED SPRAY HEAD
12 HOLES
654 p/n
73674
E-Max™
Prog
ra
mm
ing
M
a
n
ual
