background image

CAUTION -  
CHEMICAL BURN 
HAZARD

 

Deliming chemicals are caustic.  
Wear appropriate protective 
gloves and goggles during this 
procedure. 
Never siphon deliming      
chemicals or solutions by 
mouth. 
This operation should only be 
performed by qualified and    
experienced service personnel. 
 
 

IMPORTANT: 

 DO NOT spill, 

splash or pour water or deliming 
solution into or over any internal 
component other than the inside 
of the water tank. 
 
 

IMPORTANT: 

 DO NOT allow 

any internal components to 
come into contact with the     
deliming solution.  Take care to 
keep all internal components 
dry. 
 
 

NOTE:

  Repeat steps 4 thru 5 

as required to remove all scale 
and lime build-up. 
 
 
 

PROCEDURE:  Delime the Water Tank  

 
PRECAUTIONS:    Disconnect brewer from electric power.  
                               Allow brewer to cool. 
 
FREQUENCY:        As required (Brewer slow to heat) 
 
TOOLS:                  Deliming Solution 
                               Protective Gloves, Goggles & Apron 
                               Mild Detergent, Clean Soft Cloth or Sponge 
                               Bristle Brush, Bottle Brush 
                               Large Sink (or other appropriate work area) 

 
 

1.    Disconnect brewer from the electrical supply.  Turn off the  
      water shut-off valve and disconnect the water supply line 
       from the brewer inlet fitting. 
 
2.    Remove the tank lid assembly as described on page 13. 
 
3. Remove the water tank from the brewer body by lifting 

straight up.  Empty all water from the tank.  Set the tank back 
into the brewer. 

 
4.    Mix 2 quarts of deliming solution according to the            
       manufacturer’s directions.  Carefully pour the deliming 
       solution into the water tank.  Lower the lid assembly back      
       onto the tank.  Allow to sit for 30 minutes, or as directed by 
      the  manufacturer. 
 
5.   At end of soaking period, remove lid assembly from tank.  
       Thoroughly rinse internal components of lid assembly with 
       clear water.  Using a stiff bristle brush, scrub the heating    
      element (and faucet water coil on automatic brewers) to            
       remove lime and calcium build-up.  Rinse with clean water.  
       Store lid assembly in a safe location . 
 
6.    Remove the tank from the brewer and empty.  Using a stiff 
      bristle brush, scrub the interior of the water  tank to remove 
       lime and calcium build-up.  Rinse with clean water.   
 
 
 

MAINTENANCE 

Summary of Contents for 8748 Series













Reviews: