Blonder tongue HDE-4S-PRO User Manual Download | Manualshive

Page: 6 / 40

background image

6 HDE-4S-PRO

Instruction Manual

Section 2 — Product Summary

2.1 Revision History & Reason

This is the second edition. Added one part channel number support and CVCT warning.

2.2 Product Application & Description

Application:

HDE-4S-PRO (MPEG-2 HD Encoder: 4xHD-SDI + 1xSpare to 4xQAM + 4xIP) is the first generation in Professional MPEG-

2 Encoder Series, especially designed to deliver superior motion optimization for programming such as fast-paced live

sporting events. The unit accepts up to four (4) high-definition (HD) programs from: 4xHD-SDI. MPEG-2 encoded outputs

are available in the following formats simultaneously: 4xQAM, 4xIP (1000Base-T Ethernet), and 4xASI.
To improve transport efficiency, the encoder allows operator to (i) assign two (2) HD programs to a QAM output channel,

and (ii) to individually turn on/off each of the four (4) adjacent QAM output channels.
The encoder supports Dolby® Digital and Closed Captioning (EIA-608 and EIA-708). It is also equipped with an Emergency

Alert System (EAS) interface. A front-panel RF test point allows for monitoring/testing of the QAM output without service

interruption.
Comprehensive remote monitoring and control is accomplished using any standard Web browser via a front-panel

10/100BaseT Ethernet connection.

Features:

• Accepts up to four (4) programs: 4xHD-SDI

• Supports HD-SDI input loop thru for monitoring

• Simultaneously delivers the following outputs: 4xQAM (Adjacent), 4xIP (SPTS), and 4xASI

• Multiplexes up to four (4) input programs in any of the following output combinations:

(i) 1:1 (1 program per QAM channel)

(ii) 2:1 (2 programs per QAM channel, not exceeding 38.8Mbps)

• Each of the four (4) QAM channels can (i) contain 1 or 2 programs, and (ii) be turned on/off individually

• Provides 40 dBmV QAM output level for four (4) combined channels

• Provides comprehensive GUI-based monitoring and control via standard Web browsers

• Supports Closed Captioning EIA-608 and EIA-708

• Equipped with EAS interface (Analog Video + L/R Audio)

• Supports Real-time Dolby® Digital audio encoding

• Supports user-defined PSIP configuration

«
...
4
5
6
7
8
...
»

Summary of Contents for HDE-4S-PRO









































Reviews:

No comments

Related manuals for HDE-4S-PRO

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands