27
HDE-2S-IP
User Manual
5.8 ”Main > TS Config” Screen
The “Main > TS Config” screen (Figure 5.8) is a “user-configurable” screen to assign the Transport ID, Transport Bitrate
(overall), Modulation Mode, Out of Band signaling, Outgoing PID value, Program Number, Short program Name and
Major and Minor Channel number:
Figure 5.8 “Main > TS Config” Screen
Figure 5.8 “Main > TS Config” Screen
MULTIPLEXED MPTS OUTPUT CONFIGURATION:
TS ID:
user must enter the identification number for the output TS. The range is 1 to 65535. The TS ID assigned must
be unique.
TS Bitrate:
user must select bitrate for the TS. Possible options are:
i. 19.39 Mbps –
Select this setting when the primary encoder output will be ASI for an ATSC application.
ii. 38.81 Mbps –
Select this setting if an external QAM 256 modulator(s) will be used with the encoder’s ASI
output(s).
Modulation Mode:
user can select the modulation mode. Possible options are: Reserved, Analog, QAM64, QAM256,
8-VSB, and 16-VSB.
Out of Band:
an out-of-band (OOB) is a channel which is the combination of the forward and reverse OOB channels.
When a cable virtual channel is flagged as being out-of-band, it is carried on the out-of-band channel. Possible options
are Enable, and Disable. When Enabled, assigns the OOB bit in the TS packet and labels the TS as out-of-band.
1
1
1
2
3
4
2
3
4
5
6
2
3
4
