13
•
If possible let the fuel burn out completely until the burner is fully emptied. This avoids a
potential deflagration when reignited and smell of alcohol in the room. To shut down the flame
please proceed as follows:
1. Completely close the burner cover / flame regulator with the provided sliding tool.
2. Wait until the flame is fully extinguished.
3. If necessary dispose of remaining fuel after the burner has completely cooled down (see
paragraph 10.1)
6.5 In case the fire does not immediately shut off:
6.5 In case the fire does not immediately shut off:
6.5 In case the fire does not immediately shut off:
6.5 In case the fire does not immediately shut off:
Move the lever to reopen the burner and close it again with a quick movement. This will cut the
flame off. If necessary repeat this until the flame is shut off completely.
In the event of this being unsuccessful please let the flame burn with the burner being closed for
another 5-10 minutes. Then repeat the above procedure. If this is unsuccessful please open the
burner and the all the fuel burn off.
7. In case of fire
7. In case of fire
7. In case of fire
7. In case of fire
Alcohol-resistant foam or carbon dioxide are suitable extinguishing agents. Please make sure to
keep an extinguished in proximity of the fireplace.
8. Cleaning / Maintenance
8. Cleaning / Maintenance
8. Cleaning / Maintenance
8. Cleaning / Maintenance
WARNING!
WARNING!
WARNING!
WARNING! Risk of burns!
Please let the fireplace cool down for at least 15 minutes before touching and cleaning the product!
ATTENTION!
ATTENTION!
ATTENTION!
ATTENTION! Potential damage to property
Never use aggressive cleaning agents such as chemicals, fuel, turpentine or cleaning powder for
cleaning.
8.1: Cleaning th
8.1: Cleaning th
8.1: Cleaning th
8.1: Cleaning the burner
e burner
e burner
e burner
The burner should regularly be cleaned.
Please proceed as follows:
1. After the flame is shut off, please wait at least 15 minutes until the burner has cooled down.
2. Dispose of any remaining fuel in the burner (see paragraph 10.1)
3. Use warm water and ph-neutral washing-up liquid to regularly clean the burner from the inside
and outside. Dry the burner after cleaning.
8.2 Cleaning the fireplace body:
8.2 Cleaning the fireplace body:
8.2 Cleaning the fireplace body:
8.2 Cleaning the fireplace body:
Please regularly clean the fireplace body as per the enclosed instructions.
