Blomberg WNF 8427 A30, User Manual

Page: 7 / 56

7 - EN
• Viscose
You can use this program to wash your
laundry that bear “viscous and viscous blends”
labels or which are advised to be washed
with delicate programs. It cleans your laundry
without causing any deformation to them. E.g.:
Blouses, dresses, skirts and etc.
• Duvet
You can also wash your machine-washable
fiber duvets with this program.
C You must not load more than 1 piece of
fiber duvet for two persons.
Economy Symbol
Shows energy saving programs and
temperature selections.
As "Intensive" and "Hygiene" programs are
long programs with higher temperature
selections to ensure hygiene, “Economy”
Symbol will not light up.
Special programs
For specific applications, select any of the
following programs:
• Rinse
This program is used when you want to rinse
or starch separately.
• Spin + Drain
This program spins with maximum possible
rpm in the default setting after the water drains
from the machine.
C
Use a lower spin speed for delicate
laundries.
Temperature selection
Whenever a new program is selected, the
temperature anticipated for that program
appears on the temperature indicator (7b).
To change the temperature, press the
temperature button. Temperature decreases in
10° increments.
Cold selection is shown with “-” symbol.
90˚C
Normally soiled, white cottons and
linens. (Ex.: coffee table covers,
tablecloths, towels, bed sheets)
60˚C
Normally soiled, fade proof colored
linens, cottons or synthetic clothes
(Ex.: shirts, nightgowns, pajamas)
and lightly soiled white linen clothes
(Ex.: underwear)
40˚C
30˚C Cold
Blended clothes including
synthetics and woolens as well as
delicates.
Spin Speed selection
Whenever a new program is selected, the
maximum spin speed of the selected program
is displayed on the spin speed indicator.
To decrease the spin speed, press the “Spin”
button. Spin speed decreases gradually. Then,
rinse hold and no spin options are shown
respectively.
Rinse hold is shown with “ ” and no spin is
shown with “ ” symbols.
If you are not going to unload your clothes
immediately after the cycle, you may use rinse
hold function in order to prevent your clothes
become wrinkled when there is no water in
the machine. With this function, your laundry
is kept in the final rinsing water. If you want to
spin your laundry after the rinse hold function:
- Adjust the spin speed.
- Press “Start/Pause/Cancel” button.
Program resumes. Your machine drains the
water and spins your laundry.
You can use no spin function in order to drain
the water without spinning at the end of the
program.