16 / English
Front-Loading Automatic Washer
Installation Instructions
Allowable Clearances for Closet Installation
When installed in closet (washer only/washer dryer stacked) :
Sides, Rear, Front 1/2 in. (1.27 cm), Top= 1 in. (2.54 cm)
Closet door ventilation requirement: A louver having minimum 23 in2
(148 cm2) air opening located at 3 in (7.62 cm) from the bottom of
closet door.
Stacked Installation
You can stack your Blomberg washer and dryer (model no.: DHP
24412 W / DHP 24400 W) by using a special stacking kit (Part
No.2985300200). If necessary, consult your dealer or technical
service for supplying the stack kit. In stacked closet installation,
following configuration is necessary:
A louver having minimum 23 in
2
(148 cm
2
) air opening located at 3
in (7.62 cm) height from the bottom of closet door (for washer) & A
louver of minimum 46 in
2
(297 cm
2
) air opening located at 3 in (7.62
cm) distance from the top of closet door (for dryer).
Removing packaging reinforcement
Tilt the washer to remove the packaging reinforcement. Remove the
packaging reinforcement by pulling the ribbon.
