![background image](http://html1.mh-extra.com/html/blomberg/taf-1330/taf-1330_instruction-manual_2773970012.webp)
AT A GLANCE
Preparation and start
1. Put laundry in the drum and close the
door.
4. If desired set delay timer
5. Press the >Start< button.
2. Turn the appliance on by pressing
On/Off button
Programme end
The programme cycle has completed
when the indicators >Stop/Anti-Ceasing
<
and >Clean fluff filter
< are illuminated.
Throughout the anti-crease stage
the indicator >Stop/Anti-Ceasing
<
is on. The programme can then be
ended at any time.
1. Open door, remove laundry, check
drum for foreign objects.
2. Set the programme selector to >Stop<.
3.
After every drying cycle
:
– Clean the fluff filter (see "Fluff fil-
ter").
4.
After approx. 20 drying cycles
or
four times a year
:
– Clean drum ribs (see "Drum ribs").
5.
When required
:
– Clean housing and fascia using a
soft cloth and a mild soap; wipe dry
with a soft cloth.
Do not use scrubbers and scouring
powders! They will damage the plastic
parts and enamel.
Laundry final drying
1. Set the programme selector to one of
the timed programmes
>60min<,
>40min<,
2. Press the >Start< button.
Adding more laundry
This makes only sense at the begin-
ning of a drying cycle, otherwise the
result will be a mixture of not quite
dry and too much dried textiles.
2. Put laundry in the drum and close the
door.
3. Press the >Start< button.
3. Set the programme selector.
Aborting a programme
Do not turn appliance off during the
heating phase (indicator >Drying
<
is on). Risk of heat accumulation!
2. Set the programme selector to
>Fluff/Refresh<
3. Press the >Start< button.
4. Wait for the programme cycle to end.
1. First stop the running proramme (press
the >Start< button for 2 seconds.
1. Press pause button.
or >10min<
>20min<
When the door is opened during the
programme, the programme will be
paused automatically and the light on
the start button will flash. The start
button must be pressed again to
continue the programme.
Changing the programme
When changing to a
different
pro-
gramme the running programme must
be stopped first.
To do so the >Start< button must
be pressed for 2 sec. in order to cancel
programme.
11
Summary of Contents for TAF 1330
Page 1: ......