![background image](http://html1.mh-extra.com/html/blomberg/mkl-5460/mkl-5460_instruction-manuals_2774037008.webp)
Switching off a cooking zone
Select the zone to be switched off using the (+) selection button. The selection is shown by the
decimal point on the display of the related zone. By pressing the (+) button and (-) button at the
same time, the power level is set at 0. Alternatively, the (-) button can be used to reduce the power
level to 0.
All cooking zones are at the “0” power level, the decimal points on the display flash. If a cooking
zone is “burning hot”, an “H” will appear, instead of an “0”
Switching off all cooking zones
All cooking zones can be switched off immediately, at any moment, by pressing the power button.
When on stand-by, an “H” appears for all cooking zones that are “burning hot”. All the other
displays will switch off.
The power level
The power of the cooking zone can be set to 9 levels, indicated by the symbols “1” to “9”, using an
indicator light
display with seven sections.
The automatic heating function (by selecting)
When the automatic heating function has been activated, the power of the cooking zone
reaches 100% for an established heating time, which depends on the selected power level.
At the end of this heating time, the touch control returns to the pre-selected power level.
Starting the automatic heating process:
•
The touch control is on and a cooking zone is selected.
•
When power level 9 has been reached, automatic heating is activated by pressing the PLUS
button again.
•
The required power level is selected by pressing the PLUS and MINUS buttons; the chosen
level appears on the display.
•
Three seconds after pressing these buttons (power level selection) and 16 seconds after the
activation of the automatic heating function, the symbol “A” (which indicates a power
increase) appears on the display instead of the selected power level.
•
If a lower level is selected using the MINUS button, after the “A” has appeared on the
display, the automatic heating function will be interrupted.
6
Summary of Contents for MKL 5460
