Blomberg MIS 3200, Instruction Manual

Page: 15 / 130

3.6 Timer function
The timer function module provides a timer for each of
both cooking zones of a Touch Control.
All timers are countdown timers. The optional setting range is between 1 and
99 minutes. After the timer is set, it counts backwards in minute steps down
to 0. Then, a visible and audible alarm signal is emitted.
As for a cooking zone related mode, the corresponding cooking zone is
disconnected automatically upon expiry of the timer.
Before operating a timer, the Touch Control is to be switched into at least
standby mode via the ON/OFF key. Switching off the Touch Control disables
the cooking zone related timer, programmed egg timers continue running.
3.7 Lo Temp – function (presently only for induction)
The Lo Temp function is supposed to keep cooked meals
warm on top of a cooking zone.
The operator can activate it by selecting a cooking stage
between 0 and 1 resulting in both cooking zone displays to show the symbol
„Lo“ (see above). If the cooking stages are reduced by holding the minus
key, the Low-temp cooking stage is stopped. Another touch would be
necessary to switch to stage 0.
3.8 Booster activation
All induction cooking zones have a booster function.
The booster allows a particularly speedy heating of the food stuffs,
thus, helping the operator to save time.
No booster key available in the system:
Cooking zone must be set to the highest possible level :
Release of „+“ or „-“ key. Another touch on the „+“ key activates the booster
function. The corresponding cooking stage display shows a static „P“ symbol.
11