![background image](http://html1.mh-extra.com/html/blomberg/ltk2802w/ltk2802w_user-manual_2773966029.webp)
Dryer / User Manual
EN 29 / 36
8
Troubleshooting
Drying process lasts for a long time.
•
Pores of the fibre filter might be clogged. >>>
Wash the filter with warm water.
•
Condenser might be clogged. >>>
Wash the condenser.
•
Ventilation grills at the front of machine might be blocked. >>>
Remove any items in front of the ventilation
grills that block ventilation.
•
Ventilation might be inadequate if the installation area is very small. >>>
Open the windows and doors in
order to prevent excessive increase in room temperature.
•
There might be furring on the damp sensor. >>>
Clean the damp sensor.
•
Laundry might be overloaded. >>>
Do not overload the tumble drier.
•
Laundry might not have been adequately spun. >>>
Increase the rpm of tumble drier.
Laundry is still wet at the end of drying.
C
Hot laundry unloaded at the end of drying feel wetter than they really are.
•
You may not have used a programme suitable for laundry type.>>>
Check the maintenance labels on the
laundry and select a programme suitable for their type, or use the time programmes additionally.
•
Pores of the fibre filter might be clogged. >>>
Wash the filter with warm water.
•
Condenser might be clogged. >>>
Wash the condenser.
•
Laundry might be overloaded. >>>
Do not overload the tumble drier.
•
Laundry might not have been adequately spun. >>>
Increase the rpm of tumble drier.
Tumble drier does not turn on or programme cannot be started. Tumble drier does not activate when set.
•
The power cord might not be plugged in. >>> Make sure the power cord is plugged in.
•
Loading door might be open. >>> Make sure that the loading door is properly closed.
•
You may not have set the programme or pressed the Start/Pause button. >>> Make sure that you have set
the programme and it is not in Pause position.
•
Child lock might be active. >>> Disable the
child lock.
Programme was interrupted for no reason.
•
Loading door might not be properly closed. >>>
Make sure that the loading door is properly closed.
•
A power cut might have occurred. >>>
Press the Start/ Pause button to start the programme.
•
Water tank might be full. >>>
Drain the water tank.
Laundry is shrunk, damaged or worn out.
•
You may not have used a programme suitable for laundry type. >>>
Check the maintenance labels on the
laundry and select a programme suitable for their type.
The lighting inside the tumble drier does not turn on. (In models with lamps)
•
You may not have turned on the tumble drier be using On/Off/Cancel button. >>>
Make sure that the tumble
drier is at ‘on’ position.
•
Lamp might be broken. >>>
Contact the Authorised Service for the replacement of lamp.
Filter cleaning warning led is on.
•
Fibre filter might not have been cleaned. >>>
Clean the filter.
Filter cleaning warning led flashes.
•
Filter bearing might be clogged with fibre. >>>
Clean the filter bearing.
•
There might be a layer in the filter pores that causes clogging. >>>
Wash the filter with warm water.
•
Condenser might be clogged. >>>
Wash the condenser.
Water is leaking from the condenser cover.
•
There might be fibre build-up inside the loading door and on the surfaces of loading door gasket. >>>
Clean
the inner surfaces of loading door and surfaces of loading door gasket.