EN 24 / 36
Dryer / User Manual
6.11 Starting the Programme
Start the Programme by pressing the Start / Pause
button.
Start/Pause led and the Drying led light up, indicating
the Programme started. The “:” sign in the middle of the
remaining duration starts to blink.
6.12 Child Lock
The machine features a child lock which prevents the
machine Programme flow from being affected when
buttons are pressed during operation.
When the Child Lock is active, all buttons except for the
On/Off button are deactivated.
To activate the child lock, press the Sound Notification
button and End Duration button simultaneously for 3
seconds.
Te child lock should be deactivated to be able to start
a new Programme after the current Programme ends
or to be able to interfere with the current Programme.
Keep the same buttons pressed for 3 seconds again to
deactivate the child lock.
C
The lock led on the screen lights up when
the Child Lock is activated.
C
Child Lock deactivates when the machine
is turned off and on again using the On/
Off button.
A warning sound is heard when any button is pressed
(except for On/Off button) or the Programme Selection
knob is turned while the child lock is active.
6.13 Changing the Programme after it
is started
After the machine starts running, you can change the
Programme you selected to dry your laundry with a
different Programme.
1. For example, to select Extra Dry Programme instead
of the Iron Dryness, stop the Programme by pressing
the Start / Pause button.
2. Turn the Programme Selection knob to select the
Extra Dry Programme.
3. Start the Programme by pressing the Start / Pause
button.
Adding and removing laundry in stand-by
mode
If you want to add or remove laundry after the drying
Programme starts:
1
.
Press the Start/Pause button to take the machine
into Stand-by mode. Drying operation stops.
2. Open the loading door, add or remove laundry and
close the loading door.
3. Start the Programme by pressing the Start / Pause
button.
C
The laundry adding made after the drying
operation started may cause the dried
laundry inside the machine to mix with
the wet laundry and the laundry to remain
damp after the operation ends..
C
Laundry adding and removing can be
repeated as much as desired during drying
operation.
But this process would continuously
interrupt the drying operation, and so
would cause the Programme duration
to lengthen and increase energy
consumption. Thus, it is recommended to
add laundry before the Programme starts.
C
If a new Programme is selected by
changing the position of the Programme
selection knob while your machine is in
stand-by mode, the running Programme
ends.
Do not contact the inner surface of the
drum when adding or removing laundry
during a continuing Programme. The drum
surface is hot.
Operating the product
