![background image](http://html1.mh-extra.com/html/blomberg/ldv42244/ldv42244_user-manual_2773951012.webp)
Dishwasher / User manual
11 / 44 EN
Installation
Fitting a different plug
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals on your plug,
proceed as follows:
1. Connect the green - yellow or
green (earth) wire to the terminal
in the plug marked ‘E’ or with the
symbol
or coloured green
and yellow or green.
2. Connect the blue (neutral) wire to
the terminal in the plug marked ‘N’
or coloured black.
3. Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
With the alternative plugs a 13A fuse
must be fitted either in the plug or
adaptor or in the main fuse box. If in
doubt contact a qualified electrician.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
If the supply cord or the mains lead
is damaged please do not replace it
yourself. The supply cord or the mains
lead must be replaced by a Authorised
Service Agent or a similarly qualified
person.
A
This appliance must
be earthed
If the fitted moulded plug is
not suitable for your socket,
then the plug should be cut
off and an appropriate plug
fitted.
Destroy the old plug, which
is cut off as a plug with a
bared cord could cause a
shock hazard if inserted into
a socket elsewhere in the
house.
The moulded plug on this
appliance incorporates a
13A fuse. Should the fuse
need to be replaced an ASTA
approved BS1362 fuse of
the same rating must be
used. Do not forget to refit
the fuse cover. In the event
of losing the fuse cover, the
plug must not be used until
a replacement fuse cover
has been fitted. Colour of
the replacement fuse cover
must be the same colour as
that visible on the pin face
of the plug. Fuse covers
are available from any good
electrical store.