40
Dishwasher / User manual
/45 EN
Troubleshooting
• Dishes are not placed orderly in the machine. >>> When placing the glasses
and other glassware into the basket lean them not against other dishes but the
edges or racks of the basket or the glass support tines. Striking of the glasses
to each other or to other dishes due to the impact of water during washing can
cause breaks, or scratches on their surfaces.
A smear remains
on
glasses
that resembles
milk
stain
which
can
not
be
removed
when
wiped
by
hand. A bluish
/ rainbow
appearance
occurs
when
the
glass
is
pointed
to
light
.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse
aid when adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the hardness
of the supply water appropriately and check the water hardness setting. If
your supply water is soft (<5 dH), do not use salt. Choose programmes that
wash in higher temperatures (e.g. 60-65°C). You can also use glass protective
detergents that are commercially available.
Foam
forms
in the
machine
.
• Dishes are washed with hand-wash detergent by hand but not rinsed before
placing them into the machine. >>> Hand-wash detergents do not contain
antifoam. There is no need to hand-wash the dishes before placing them into
the machine. Removing the coarse soil on the dishes under tap water, with a
tissue paper or fork will be sufficient.
• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care
that rinse aid is not spilled in the machine when you are filling it. Clean any
spilled rinse ait with the help of a tissue paper/towel.
• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse
aid reservoir is closed after adding rinse aid.
Kitchen
utensils are
broken
.
• Dishes are not placed orderly in the machine. >>> Load the dishes as described
in the user manual.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their
capacity.
Water remains in the dishwasher at the end
of
the
programme
.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section “Cleaning and Care”.
• Discharge hose is clogged/blocked. >>> Check the discharge hose. If
necessary, remove the discharge hose, clear the blockage and insert is as
illustrated in the user manual.
C
If you cannot eliminate the problem although you follow the instructions
in this section, consult
your dealer or the Authorised Service Agent.
Never try to repair a nonfunctional product yourself.
