12
Dishwasher / User manual
/45 EN
Installation
Fitting a different plug
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals on your plug,
proceed as follows:
1. Connect the green - yellow or
green (earth) wire to the terminal
in the plug marked ‘E’ or with the
symbol
or coloured green
and yellow or green.
2. Connect the blue (neutral) wire to
the terminal in the plug marked ‘N’
or coloured black.
3. Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
With the alternative plugs a 13A fuse
must be fitted either in the plug or
adaptor or in the main fuse box. If in
doubt contact a qualified electrician.
Initial use
Before starting to use the product, make
sure that all preparations are made
in accordance with the instructions in
sections “Important safety instructions”
and “Installation”.
•
Before using the product, fill the
salt reservoir with 1 litre of water,
add salt (see next page) and stir
to dissolve. Run the Dishwasher
without dishes on a short
programme with a small amount of
detergent.
A
There might be a small
amount of water left in the
product after factory quality
control tests. This causes no
harm to the product.