16
Possible causes
- Improper loading
- Insufficient rinse aid supply
- Dishes are removed too soon
- Wrong programme selection
- Using cutlery with a low surface
quality
Possible causes
- Wrong programme selection
- Detergent is moist or clumping
- Using cutlery with a low surface
quality
Possible causes
- Insufficient rinse aid supply
Calcium streaks,
misty
appearance
Tea, coffee or other stains
The dishes are not becoming dry
How to fix these problems
- Load the dishwasher as suggested in this booklet.
- Increase the amount of rinse aid / refill the rinse aid dispenser.
- Do not empty your dishwasher immediately after washing.
Open the door slightly so that the steam can escape. Begin
with unloading the dishwasher when the dishes are only
hand warm. Empty the lower basket first. This prevents
water from dripping off dishes in the upper basket.
- In short period programmes, the wash temperature and
therefore the cleaning performance is lower. Choose a
programme with a longer washing time.
- Water drainage is more difficult with these items. Cutlery or
dishes of this type is not suited to dishwashers.
How to fix these problems
- Select a programme which washes at a higher temperature
or takes longer.
- Bleaches in cleaners lose their efficacy when stored under
unfavourable conditions. Store detergents in a dry location.
Close the lid of the container carefully.
- Cleaning of these items is made difficult by their surface
structure. Cutlery or dishes of this type is not suited to
dishwashers.
How to fix these problems
- Increase the amount of rinse aid / refill the rinse aid dispenser
7
D
A
Filling the dishwasher salt
Attention
Only use special dishwasher salt in your machine to
soften the water.
The manufacturer is not liable for damages resulting from
the use of the wrong salt type.
Do not use coarse grained salt. Small grains or powdered
salt is more easily soluble. Never use culinary or table
salt. These types of salt do not dissolve in water easily
and will damage the function of the softening device.
Remove the lower basket from the machine.
Open the screw-in cap of the salt container by turning it
counter clockwise (Fig. ).
When operating for the first time:
Pour 1 Litre of water into the salt container (Fig. ).
Pour the salt into the container with the aid of the supplied
salt funnel (Fig. ).
Pour in enough salt to
fill the container. The container holds approx. 2 kg.
Close the cap tightly.
Begin a washing programme immediately after filling the
salt container. The washing program prevents damage
to the machine which may be caused by any spilled salt
solution.
After the first washing cycle, the salt level indicator light
will go out.
A B
C
D
B
C