![background image](http://html1.mh-extra.com/html/blomberg/fnt-9673-n/fnt-9673-n_user-manual_2773999013.webp)
EN
14
4
Preparation
t
Your cooler/freezer should be
installed at least 30 cm away from
heat sources such as hobs, ovens,
central heater and stoves and at least
5 cm away from electrical ovens and
should not be located under direct
sunlight.
t
The ambient temperature of the room
where you install your cooler/freezer
should at least be 10°C. Operating
your cooler/freezer under cooler
conditions is not recommended with
regard to its efficiency.
t
Please make sure that the interior
of your cooler/freezer is cleaned
thoroughly.
t
If two cooler/freezers are to be
installed side by side, there should be
at least 2 cm distance between them.
t
When you operate your cooler/freezer
for the first time, please observe the
following instructions during the initial
six hours.
t
The door should not be opened
frequently.
t
It must be operated empty without
any food in it.
t
Do not unplug your cooler/freezer.
If a power failure occurs out of your
control, please see the warnings in
the “Recommended solutions for the
problems” section.
t
Original packaging and foam
materials should be kept for future
transportations or moving.
t
Due to temperature change as a
result of opening/closing the product
door during operation, condensation
on the door/body shelves and the
glass containers is normal.
t
Since hot and humid air will not
directly penetrate into your product
when the doors are not opened,
your product will optimize itself in
conditions sufficient to protect your
food. Functions and components
such as compressor, fan, heater,
defrost, lighting, display and so on
will operate according to the needs
to consume minimum energy under
these circumstances.