EN
11
3.2 Installing the
plastic wedges
Plastic wedges supplied with the
product are used to create the
distance for the air circulation
between the product and the rear
wall.
3.5 Illumination lamp
Do not attempt to repair yourself but
call the Authorised Service Agent if
the LED illumination lamps do not go
on or are out of order.
The lamp(s) used in this appliance
is not suitable for household room
illumination. The intended purpose
of this lamp is to assist the user to
place foodstuffs in the refrigerator/
freezer in a safe and comfortable
way.
1.
To install the wedges, remove the
screws on the product and use the
screws supplied together with the
wedges.
2.
Insert the 2 plastic wedges onto the
rear ventilation cover as illustrated
in the figure.
3.6 Changing the door
opening direction
Door opening direction of your
refrigerator can be changed
according to the place you are using
it. If this is necessary, please call
your nearest Authorized Service.
3.3 Adjusting the feet
If the product stands unbalanced
after installation, adjust the feet on
the front by rotating them to the
right or left.
3.4 Electrical connection
A
WARNING:
Do not make
connections via extension
cables or multi-plugs.
B
WARNING:
Damaged
power cable must be
replaced by the Authorized
Service Agent.
C
If two coolers are to be
installed side by side, there
should be at least 4 cm
distance between them.
• Our company shall not be liable
for any damages that will arise
when the product is used without
grounding and electrical connection
in accordance with the national
regulations.
• Power cable plug must be within
easy reach after installation.
• Do not extension cords or cordless
multiple outlets between your
product and the wall outlet.
