![background image](http://html1.mh-extra.com/html/blomberg/dwt-81900-fbi/dwt-81900-fbi_user-manual_2773916026.webp)
23
USA
6.4 AUXILIARY FUNCTIONS
Washing programs of your dishwasher
are designed to obtain the best
cleaning effect, considering the type
of the soiling, soiling degree and
properties of the dishes to be washed.
Auxiliary functions allow you save from
time, water and power.
C
Auxiliary functions may
cause changes in the
program duration.
C
Auxiliary functions are not
suitable for all washing
programs. Indicator of the
auxiliary function that is not
compatible with the program
will not be active.
PowerWash Function
PowerWash
impeller located
under the lower
impeller helps
washing your
heavily soiled
dishes places in the right side of the
lower basket. It will give better results
to place the most soiled dish to the
right front side.
C
Do not try to remove the
PowerWash impeller!
Rapid Clean Function
It shortens the time of the washing
cycle selected and decreases water
consumption by enabling washing
under higher pressure.
Super Gloss Function
It provides superior drying
performance.
Sanitize Function
Sanitize function raises the water
temperature in the final rinse to
meet the requirements of NSF/ANSI
STANDARD 184 for Residential
Dishwashers. Certified residential
dishwashers are not intended for
licensed food establishments.
C
At the end of a succesfull
sanitization “SAN“ is
displayed on the display.
“SAN” is not displayed on
the display if the cycle is
interrupted or the water
could not be heated to the
required temperature.
C
Available programs are
indicated on Program Table
chart.
C
Note: Only sanitizing cycles
have been designed to meet
the requirements of NSF/
ANSI Standard 184 for soil
removal and sanitization
efficacy.
There is no intention, either
directly or indirectly, that
all cycles have passed
sanitization performance
tests.
Half Load function
It is used to operate the machine
without loading it completely.
1. Load your dishes in the machine as
you like. You can use both upper
and lower racks.
2. Turn the machine on with On/Off
key.
3. Select the desired program and
press the Half Load key. The Half
Load indicator will light on the
display in the Function Selected
indicator.
4. Close the door of the machine to
start the program.