background image

SAVE THESE INSTRUCTIONS

=

Do not install or store the dishwasher where it 

can be exposed to below freezing temperatures

or exposed to weather.

=

Dishwasher must be secured to adjacent 

cabinetry using the brackets provided. Failure 

to do this may cause damage to property or 

bodily injury.

=

Connect to a properly rated, protected and sized

power supply circuit to avoid electrical overload.

The dishwasher is designed for an electrical 

supply of 120 V (volts), 60 Hz (hertz), AC, 

connected to a dishwasher-dedicated, properly

grounded electrical circuit with a fuse or breakers

rated for 15 amperes. Electrical supply 

conductors shall be a minimum of # 14 AWG 

copper wire rated at  75 °C (167 °F) or higher. 

This data must be kept to prevent injury and 

machine damage. Consult a qualified electrician

if in doubt.

=

Do not use any extension cord or portable outlet

device to connect the dishwasher to a power 

supply.

=

Ensure that any plastic wrappings, bags, small

pieces etc. are disposed of safely and kept out

of the reach of children. Danger of suffocation!

=

Remove the door to the washing compartment

when removing an old dishwasher from service

or discarding it. Ensure that the appliance 

presents no danger to children while being stored

for disposal.

=

Old appliances may contain materials that can

be recycled. Please contact your local recycling

authority about the possibility of recycling these

materials.

2. INSTALLATION

WARNING

When installing the dishwasher, follow basic 

precautions, including the following:

=

The dishwasher installation must be folllowed 

in accordance with the installation manual. If 

you did not receive an installation manual order

it by calling 

BERNIE  800# or by download from

the internet WEB SITE ADDRESS).

=

Installation, maintenance and repair should be

performed by a qualified installer. Work by 

unqualified persons could be dangerous and 

may void the warranty.

=

Do not operate the appliance if damaged, 

malfunctioned, partially disassembled or if it has

missing or broken parts.

=

Before installation or service, disconnect the 

power supply to the work area by unplugging 

the unit, "tripping" the circuit breaker or removing

the fuse.

=

Only connect the dishwasher to the mains when

all installation and plumbing work is complete.

2

=

Do not store or use flammable liquids or vapours

in the area of the dishwasher.

=

When loading items to be washed, position sharp

items so that they are not likely to damage the

door  seal and load sharp knives with the handles

up to reduce the risk of cut-type injuries.

=

Do not wash plastic items unless they are marked

“dishwasher safe” or the equivalent. For plastic

items not so marked, check the manufacturer’s

recommendations.

=

If a fault occurs, switch off the appliance and 

turn off  the water tap.

=

Before cleaning or carrying out maintenance, 

switch off the appliance, disconnect the mains 

plug and turn off the water tap.

=

Repairs and technical modifications must be 

carried out exclusively by a qualified technician.

=

If the dishwasher is not in use for an extended

period of time (i.e. vacation home), we 

recommend you check that the baskets are 

empty, leave inside of the dishwasher clean, 

leave the door cracked open to allow air to 

circulate, turn off both the power and water 

supply to the dishwasher.

Summary of Contents for DW 15110 NBLOO





























Reviews: