Blodgett MARK V-100 XCEL Installation Operation & Maintenance Download Page 41

Page: 41 / 49

Operation

Smarttouch touchscreen control

creatinG neW cateGorieS

1. Select the EDIT CATEGORIES key.

Figure 36

2. Select New?
3. Select the category icon to be displayed. Use the ar-

row keys to page through the available icons. Press

the desired icon to select and return to the previous

screen.

4. Press EDIT NAME. A keyboard will appear. Enter the

desired name. Press ENTER when finished to return

to the previous screen.

Press SELECT ITEMS. Select items to be filed in the

new category. Items will be highlighted as they are

selected. Press ESC key to return to the previous

screen. The disk will be displayed, press to save your

changes.

6. To display the category, it must be added to the de-

fault menu as follows:

Press the EDIT MENUS key. Select the DEFAULT

key. Select the CATEGORIES key. Highlight the new

category. Press the ESC key to return to the previous

screen. The disk will be displayed, press to save your

changes.

Summary of Contents for MARK V-100 XCEL


















































Search results

Summary of Contents for MARK V-100 XCEL

Reviews:

Related manuals for MARK V-100 XCEL

Brands by name

Popular brands

Blodgett MARK V-100 XCEL, Installation Operation & Maintenance

Search results

Summary of Contents for MARK V-100 XCEL

Reviews:

Related manuals for MARK V-100 XCEL

Brands by name

Popular brands