Blocks PRO 30, Instructions Manual

Page: 37 / 62

MANUAL DE MANUTENÇÃO PRO 30 37
04
Unclog Nuzzel
4.3.1. Insert the needle
1
to
2 cm
into the nozzle so as to peel off the existing filament.
04.3 Insert needle
Attention
: The next procedures must be carried out with care so that there is no un-
wanted filament breaking.
At this moment there are two possible cases, being they the machine is loaded with fila-
ment or there is no filament inside the machine.
If there is filaments inside the machine, you will have to break the same about
10 cm
above
the tire to make the next task.
If there is no filament inside the machine you will have to arrange about
10 cm
of filament to
make the next task.