Blocks PRO 30, Instructions Manual

Page: 26 / 62

26 PRO 30 MANUAL DE MANUTENÇÃO
01
Change Nuzzel
If the machine is loaded with filament , before starting the nozzle exchange procedure, per-
form task
3.1
(Unload filaments).
(See page 32, task 3.1 Unload filament)
01.1 Disconnect fan plugs
Attention
: on the PRO 30 there are 4 plugs next to the print head, note that in this pro-
cedure it is only necessary to disconnect two, the two corresponding ones to the fans.
1.1.1 Disconnect the 2 plugs from fans.
01.2 Remove cap
1.2.1.Carefully remove the machine head cover so that it does not break.
(See page 29 e 30, task 2.2 and 2.3 to remove cap)