12
System Remote Control (REM)
The Line Block is equipped as standard with an RJ45 plug for system remote control.
If you own the Block Audio’s Mono Block, using the two supplied “REM” Cables, connect the REM Left and REM
Right to the left and right Mono Block.
Connecting AC mains Cable
If everything is connected, plug all three mains cables from a wall outlet or Power distributor to the AC Mains
Input sockets.
Appropriate AC mains version (115 V/60 Hz or 230 V/50 Hz) is factory pre-configured and is marked on the back
panel close to the AC mains sockets.
The device connector of enclosed mains cord is equipped with V-Lock system. This may prevent accidental
disconnection. To release the device mains connector, press on the yellow release button and pull the plug out
at the same time.
For best performance, try to route the power cord away from signal cables.
Summary of Contents for LINE BLOCK
Page 5: ...5 ...
