Manual EN
Uninterruptible Power Supply
V 1.0
Charge and control units
BLOCK Transformatoren-Elektronik GmbH
Max-Planck-Strasse 36-46, 27283
.
Verden, Germany
31.08.20 / SCH
Subject to technical changes
3
2.
General Information
2.1
Safety Instructions
Please read through these warnings and safety notes carefully before using the device. The
device must be installed by competent and qualified personnel. In the event of malfunction
or damage, switch off the supply voltage immediately and send the device to
BLOCK Trans-
formatoren-Elektronik GmbH to be inspected. The device does not contain any service com-
ponents. If an internal fuse is triggered the device probably has an internal defect. The listed
data is provided merely to describe the product and must not be regarded as guaranteed
properties in the legal sense.
2.2
Qualified Personnel
The product associated with this document can only be handled by qualified personnel taking
the documentation for the respective task into consideration - especially the safety and warn-
ing information contained therein. Based on their training and experience, qualified personnel
can guarantee that the usage of the described product satisfies all the safety requirements
and applicable provisions, specifications, norms and laws.
2.3
Intended Use
This device was designed to be installed in an enclosure and is suitable for usage with general
electronic devices, such as industrial control systems, office equipment, communication and
measurement equipment. Do not use this device in control systems in airplanes, trains or
nuclear facilities, where malfunction could lead to serious injuries or have life-threatening
consequences.
2.4
Disclaimer
The content of this publication has been reviewed with the greatest of care to ensure it cor-
responds with the hardware and software described. Nonetheless, there may be discrepancies
between the product and the documentation. Discrepancies can also occur due to the ongoing
development of the product.
For this reason, we cannot guarantee absolute conformity. Should this document contain er-
rors, we reserve the right to make the necessary corrections without prior announcement.
