Block CVR-100+ MK III, Manual

Page: 38 / 58

38
Design of the device
▶ Connect the FM / DAB + cable antenna to the device.
▶ Connect your speakers. You can either loose the screw connection and connect the stripped cable end or
connect the loudspeakers cables with banana plugs directly into the connections. They can be connected
to the CVR-100+ MK III two different loudspeaker pairs, one pair on the „A“ to the marked connections and
one on the terminals labelled „B“. Make sure you have the correct polarity of the positive (red) and negative
(black). If you want to connect two pairs of speakers to „A“ and „B“ in a parallel operation, both loudspea-
ker pairs must have at least 8 ohms.
▶ 3. If you need additional input sources such as from the tape deck, TV, DVD player, satellite recei-
ver or disk players, connect these devices to the corresponding input jack of the CVR-100+ MK III using
suitable cables. For this purpose, you have 3 analogue inputs (TV, AUX, DVD), 1 analogue Phono in-
put with a preamplifier for record players with MM system (connect them eventually to an availab-
le earthing-conductor cable with the ground screw connection) and four digital grounding cables
(3x optical and 1x coaxial) are available. In addition, an analogue line-in connection is also provided at the
front.
▶ When using an external device to record the signal sources of your CVR-100+ MK III, please connect this unit
to the REC-OUT jack. This output emits an unregulated signal without volume control or sound regulation
from the CVR-100+ MK III.
▶ If you want to use another (high end) amplifier or an active subwoofer on the CVR-100+ MK III, please con-
nect it to the pre-out jacks of the CVR-100+ MK III. This output emits a signal from the CVR-100+ MK III
influenced in volume and tone control.
▶ When connecting your CVR-100+ MK III wireless over an existing WLAN to the Internet, please install the
supplied WLAN aerial.
▶ Connect the power cable to the device and to a power outlet.