Blizzard SPEEDWING 7600HD, Owner'S Manual, Page: 11 / 24

Lit. No. 57992, Rev. 02 11 April 15, 2021
HYDRAULICS GUIDE
Hydraulic hose routing information is found on the
Hydraulic Hose Port Guide label (shown below),
located on the underside of the step plate with the
BLIZZARD
® logo.
NOTE: The skid steer supply lines use special
fi ttings that restrict the fl ow entering the block.
Do not replace fi ttings with anything other than
approved BLIZZARD hydraulic fi ttings.
GETTING TO KNOW YOUR SNOWPLOW
UNPACKING AND INSPECTION
Your skid steer snowplow has been packaged to
withstand transit and weather related damage. Fully
inspect all components upon receipt of your snowplow.
In the event of shipping damage or missing parts,
immediately contact our customer support department
at 1-888-680-8600.
Begin unpacking and inspection in the following order:
1. Remove the shipping document from the end
panel of the pallet wrap. Retain all documentation
for your records.
2. All wood framing and polyethylene material should
be removed from the pallet for easy access to the
snowplow.
3. Due to the odd-shaped components and size
of several assembly parts, various cable ties
and corrugated material are used for scratch
resistance and package orientation. Please
remove these items prior to assembly.
4. Place the main blade assembly on a fl at, level
surface.
Once you have inspected all parts and removed
all packaging materials, your snowplow is ready to
be fully assembled as described in the Installation
Instructions document.
Retain a copy of the Snowplow Owner Data Sheet
on page 3 for your records.
MANUFACTURER
NAME
2 2
1 1
TORQUE SPECIFICATIONS
Relief valves 19–21 ft-lb
Fitting jam nuts 19–21 ft-lb
57898
Hydraulic Hose Port Guide – Skid Steer
To skid steer
supply lines
To left
angle ram
To right
angle ram