Blizzard FMX10, Instruction Manual, Page: 5 / 14

Notes
The power socket must be provided with a good ground wire to guarantee the
mixer’s good grounding through it. There will be an electric shock if no ground
wire or an improper grounding mounted. The ground wire can never be connected
with gas pipe, water pipe, lightning rod or telephone line. Electric leakage should
be checked after installation. Once the power line damaged, the user must replace
them in the special maintain service company.
Don’t put your hands into the stirring barrel during operation. Power supply
should be disconnected before the mixer is going to be installed.
Don’t operate the mixer beyond the time limit to prevent reduction of its service
life.
The mixer should be mounted on a stable and clean place. Keep it away from
overheated or over-wet places and away from equipment which has strong
electromagnet or can produce strong electromagnet.
Keep the machine clean constantly. Disconnect power supply before
maintenance. Clean it with a piece of soft and a bit wet cloth. Don’t clean it with
liquid or spraying detergent.
Maintenance
Clean the bowl and stirrer daily or after use to maintain hygiene standard.
The transmission gear box is greased in factory. Check the greasing each 6 months. To
assess or refill grease, open the top cover, then fill grease from aperture or replace the
grease directly.
1
2
3
4
5