Blizzard FMX10 Instruction Manual Download Page 4

 

Operation Instruction 

 
 

Standard  power  supply 

230v/50  HzAc.  (Please  use  a  plug  with  3  wide 

contacts and good grounding.) 

Installation of mixer: Put the stirring shaft 2 in Mixer 3 and rotate it in clockwise 
direction. 

Starting procedures: Pull the hand lever 6 to raise the bowl and close the safety grille 
7 to the closed position. Select the speed required by moving the gear change hand 
lever  1  before  starting,  then  turn  on  the  power  switch  5.  Run  the  mixer  for  a 
maximum of 30 minutes of constant run. 

Speed transformation: If you want to change speed, please turn off the power switch 
5 firstly, and then pull the gear change hand lever 1 to the position required. 

Shutting down: when the operation is complete, turn off the power switch 5 firstly, 
then pull the gear change hand lever 1 to position 1, and pull back the hand lever 6 
to the lowest point and finally disconnect power supply. 

 
 

 

Accessories and Functions 

 
 

Whisk: Used for stirring of liquid material, such as cream and egg. Recommended 
speed: mid or high speed. 

Beater: Used for stirring of paste, powder and fragmental material, such as stuffing 
and cake dough. Recommended speed: start with low-speed, end with a mid-speed. 

Spiral  dough  hook:  Used  for  stirring  of  sticky  material,  such  as  dough. 
Recommended speed: low speed. 

Summary of Contents for FMX10















Reviews: