Lit. No. B64092, Rev. 09
17
April 15, 2021
40571
• Angle Cylinders
B60403
• Manifold Ports
B60539
• Angle Cylinders
9/16"
9/16"
9/16"
9/16"
25/32"
17/32"
3/4"
4. Hook each extension spring to the receiving holes
on the pivot beam and attach the opposite end of
the spring to its respective spade bolts. Install the
spade bolts through the extension spring mounting
angle on the top rear of the blade. Secure each
spade bolt by placing one 5/8"
fl
at washer on the
bolt and thread one 5/8" locknut. Tighten each
locknut until a piece of paper can pass between
the 3rd and 4th coils on the spring.
Locknut
Washer
Spring
Spade
Bolt
MOLDBOARD & A-FRAME ASSEMBLY – 760TR, 860TR & 8600TR MODELS
5. Install the blade guides at each end of the
moldboard by inserting the cap screws through
the holes at the top of the wing reinforcement rib.
Tighten all screws with locknuts.
Summary of Contents for 760TR
Page 2: ......
