Page 13
TOURnado™ CSI COB User Manual Rev. C
© Copyright 2015 Blizzard Lighting, LLC
DMX Values In-Depth (3-Channel Mode)
Channel
Value
What It Does
1
000 <--> 255
Dimmer (0% <--> 100%)
2
000 <--> 005
006 <--> 115
116 <--> 130
131 <--> 170
171 <--> 210
211 <--> 250
251 <--> 255
Strobe
No Function
Normal Strobe (Slow <--> Fast)
Random Strobe (Slow <--> Fast)
Electronic Sinewave (Slow <--> Fast)
Opening pulse(Slow <--> Fast)
Closing pulse (Slow <--> Fast)
No Function
3
000 <--> 010
011 <--> 020
021 <--> 030
031 <--> 040
041 <--> 050
051 <--> 060
061 <--> 070
071 <--> 080
081 <--> 090
091 <--> 255
32-Bit Dimmer
As set in the control menu display
Linear curve
Square law curve
Inverse square law curve
S-curve
Linear curve and smooth
Square law curve and smooth
Inverse square law curve and smooth
S-curve and smooth
Use the dimmer mode which menu had set up
DMX Values In-Depth (1-Channel Mode)
Channel
Value
What It Does
1
000 <--> 255
Dimmer (0% <--> 100%)
Troubleshooting
Symptom
Solution
Fixture Auto-Shut
Off
Check the fan in the fixture. If it is stopped or moving slower than normal,
the unit may have shut itself off due to high heat. This is to protect the fixture
from overheating. Clear the fan of obstructions, or return the unit for service.
Beam is Dim
Check optical system and clean excess dust/grime. Also, the overheat protec-
tion mode (100%/80%/50% output) could be active. To check, see the LED
menu display reading at INFO>SOFT>POW.
No Light Output
Check to ensure fixture is operating under correct mode, IE DMX/Etc., if ap
-
plicable.
No Power
Check fuse, AC cord and circuit for malfunction.
Fixture Not Respond-
ing / Responding
Erratically
Make sure all connectors are seated properly and securely.
Use Only DMX Cables and/or check cables for defects
Install a Terminator.
Reset fixture(s).
If your problem isn’t listed, or if problems persist,
please open a support ticket at www.blizzardlighting.com/support.
