Page 13
Super-G™ 150 User Manual - Rev. A
(c) 2018 Blizzard Lighting, LLC
Factory Reset:
1.) Navigate the menu until you reach
Option
, and press
<ENTER>
.
2.) Then navigate to
Reset Default
and press
<ENTER>.
3.) Use the
<UP/DOWN>
buttons to highlight
Yes
or
No,
and press
<ENTER>.
Language:
Here you can choose your preferred menu display language.
1.) Navigate the menu until you reach
Language
, and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to highlight any available option,
and press
<ENTER>.
3.) Press the
<ENTER>
button to confirm your selection.
Reset:
This reset option will reset the motors only (see device options for factory reset).
1.) Navigate the menu until you reach
Reset
, and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to highlight
Yes
(motor reset) or
No
(cancel).
3.) Press the
<ENTER>
button to confirm your selection.
Setup Options:
The setup menu contains password protected calibration and mic settings.
Password
(password = 008)
1.) Navigate the menu until you reach
Setup
, and press
<ENTER>
.
2.) Then navigate to
Password
and press
<ENTER>.
3.) Use the
<UP/DOWN>
buttons to enter the password which is
008,
and press
<ENTER>
to confirm your choice.
Calibration:
1.) Follow the instructions above to enter the password in the
Setup
menu.
2.) Navigate the menu until you reach
Calibration
, and press
<ENTER>
.
3.) Use the
<UP/DOWN>
buttons to highlight any available option,
and press
<ENTER>.
4.) Now use the
<UP/DOWN>
buttons to make any fine adjustments,
and press
<ENTER>
to confirm your choice.
Mic Sensitivity:
1.) Follow the instructions above to enter the password in the
Setup
menu.
2.) Navigate the menu until you reach
Mic Sensitivity
, and press
<ENTER>
.
3.) Use the
<UP/DOWN>
buttons to adjust the mic sensitivity level, ranging anywhere
from 0% to 100%.
4.) Press the
<ENTER>
button to confirm your selection.
