Page 9
Stiletto Beast™ User Manual - Rev. A
(c) 2016 Blizzard Lighting, LLC
Installation
The fixture can be installed on the floor resting on its rubber feet, or mounted
on truss.
● Choose a suitable place to put or hang the equipment when installing. When
hanging the fixture, use the included clamp mounting brackets with suitable
clamps to properly support the weight of the fixture.
● When installing the equipment, ensure that no flammable or explosive materi
-
als are within 1/2 meter distance.
● Please ask professionals to install the equipment. Any improper installation
can cause personal injury or material damage.
● The equipment must be placed in a ventilated area, at least 50 cm from the
ground, and always ensure that the vents are not clogged.
● Mount the fixture using suitable type clamps. The clamp should be rated
to hold at least 10x the fixture’s weight to ensure structural stability. Do not
mount to surfaces with unknown strength, and ensure properly “rated” rigging
is used when mounting fixtures overhead.
WARNING
: With the exception of when the fixture is positioned on
the floor, a safety cable must always be used. It must be securely fixed
to the support structure of the projector and then connected to the fix
-
ing point at the center of the base.
